UV Resistant Fiberglass FRP PU Foam Panel for Refrigerated Truck Body
|Can Be Printed
|Ral or Ncs or Customer Shade
|Standard Seaworthy Pallet, Film on Each Panel
Product DescriptionFRP Pre-laminated PU Foam Sandwich Panel for Trailer Construction
Structure: FRP skin + PU (Polyurethane foam) + FRP skinBonding technology: vacuum with high pressure, guaranteeing the strength and stability.
FRP sandwich panel is a high-tech, high-quality new sheet, it does not occur in the ultra-low temperature of -40 degrees brittle crack,high temperature below 100 degrees will not be deformed, and can prevent heat transfer.It can replace color steel plate, aluminum, etc., And to overcome the traditional products rust, corrosion, easy to depression deformation, can not adapt to harsh environments and other shortcomings.FRP sandwich panels with gel coated, can be self-cleaning, anti-uv, anti-static, etc, is the most popular international truck body and van panel.Detailed PhotosProduct Parameters
|12mm-65mm,according to your application
|up to 2800mm,standard size 1.22m
|2440mm standard, can be customer specific
|RAL-, scale or customer-specific shades
|Versatile, meeting different require.Gel coat available
|1.Packed on plywood pallet
|1. Samples: 2-3 dyas
|2.Packed in plywood case
|2. Mass production: 7-15 working days after receive payment
|3.Load in container directly
|3. Delivery terms: EXW, FOB. CIF, DDP all can be accepted
Yangzhou Hengyi Composite Materials Co., Ltd was formed in 2016. With more than 10years experience ,we are one of the leading manufacturer in making FRP sheet, sandwich panels.Located at Jiangdu in Yangzhou China, we are a specialist designer and manufacturer of fibreglass composite insulated panels. Our capabilities extend across a wide range of applications for the RV and transport industries such as mobile homes, caravans, trailers and truck bodies. We also manufacture panels for the boating, building and construction industries to just about any job that requires an insulated composite panel.
We have wide range of sandwich panel products. The most popular ones are FRP plywood panel, Honeycomb Panel, XPS, PU and EPS Foam panels. The surface -FRP skin on top and bottom of the sandwich panel can be versatile. There' s flat smooth finish, anti-slip pattern, pebble embossed.
As a result. there could be plenty matches to cater customers' different requirements.
Currently, the maximum size we can make is 11.5m*2.9m.
1.Are you factory or trading company? We are abosultely factory.It's very close to airport,only 9minutes by car from Yangzhou airport.
• Can I order panels to my exact dimensions ?Yes,so panels are ready to be mounted to the exact dimensions required.• I need to fix some track to an insulated panel, what should I do ? We have two solutions: you supply drawings of your panel showing the type of insert, its dimensions and position. We then manufacture the panel to these drawings. Alternatively, you indicate the position of your track and we will attach it to the panel for you; either recessed or semi-recessed.• How are your panels packed ? There's protective film on both sides of each panel. Panels then into pallet. These packs are covered with polythene to protect the panels during transport. Each pack is placed on wooden supports to facilitate unloading either using straps or with a fork-lift.• What advise can you give on handling panels ?Our panels are transported flat on platform trailers. We do not advise the use of fork-lifts for unloading long panels due to the risk of bowing which can lead to cracking of the gelcoat. We recommend the use of a suction lift taking care when unloading thin panels.• How should I stock my panels ?Ideally, you should stock panels as we do in the factory. Flat on wooden supports which are lined up one under the other to prevent distortion of the panel. The edges of composite panels should be protected from the elements before use and stocking panels outside is not advisable. The use of a tarpaulin to protect panels should only be considered a temporary measure as it can retain humidity and cause condensation to damage panels, especially if colour impregnated.• What warranty do you provide on your panels ?Our statutory warranty is for 12 months. We can extend this warranty as an option.Our warranty covers manufacturing faults but does not cover problems relating to an incorrect mounting or errors of handling or stocking.